您的位置:開發工具

                    開發工具

                    ST-LINK/V2

                     The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

                    In addition to provide the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 Vrms.

                    STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software.

                    STM32 applications use the USB full-speed interface to communicate with Atollic®, IAR, Keil®or TASKING integrated development environments.

                    Key Features

                    • 5 V power supplied by a USB connector
                    • USB 2.0 full-speed-compatible interface
                    • USB standard A to Mini- B cable
                    • SWIM specific features
                      • 1.65 V to 5.5 V application voltage supported on SWIM interface
                      • SWIM low-speed and high-speed modes supported
                      • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
                      • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
                      • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
                    • JTAG/serial wire debugging (SWD) specific features:
                      • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
                      • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
                      • JTAG supported
                      • SWD and serial wire viewer (SWV) communication supported
                    • Direct firmware update feature supported (DFU)
                    • Status LED which blinks during communication with the PC
                    • Operating temperature 0 to 50 °C
                    • 1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only)

                    IMAGE

                    [返回]
                    欧美精品v在线视频,色拍日本欧洲亚洲另类图片,大香伊蕉在人线99国产图片,日本高清在线中字视频,2020正在播放久久久久久|国产性天天综合